Has anyone had an issue with taking out old spikes?
Have you had any luck with certain tools?
Is there any spike extractor that can be attached to a drill or 3/8 Socket Wrench?
Maybe FootJoy should come out with a better way to improve their shoes longevity with easier ways to change spikes. JAT
Thoughts?
nathan,
Got to WalMart and in the golf section they have a tool that runs about $10. It comes with 2 heads that store in the handle and works great for removing any type of spike that you may find. I carry one in my accessory bag all the time.
Eagle3,
I have same tool and it does work great!
Nathan,
I tend to change my spikes a little before its really time because the longer you wait between changes the more difficult they are to take off. Dirt is drying on the bottom of your spikes everytime you play, and little rocks can get stuck in the holes the tools use for leverage. I walk frequently so I change mine about once every month-month and 1/2. I like the feel of newer spikes so changing them often is good for me.
+1 on the spike tool -- easy to use, has options for removing different types of spikes.
+1 golfchick...that tool is very important...
Nathan
You absolutely need a spike tool with a handle. Way easier to remove/replace the spikes.
That said, if you've really overworn them, the trusty pliers will allow you to grab the offending spike and twist it out. If you get the two small twist holes stripped then this is the only way to manage the removal.
Agree with the tool; I have two of them! Also, even if you're not changing the spikes, it helps to take them out from time to time and clean them thoroughly. This also helps make them easier to get out when it is time to change them. I try to do mine every three to four wearings.
I agree with most of the suggestion here - the biggest problem is getting dirt under the spike over time. taking them out and cleaning them every 10 or so rounds will really help.
GO HOKIES
Another thing that I have found before installation or after cleaning them is to use a little white water resistant grease or plumbers grease on the threads. In the case of the Classics, rusting is a problem avoided. With the new spikes, the grease keeps the dirt from getting imbedded and makes removal easier. I have done this for many years and with the aforementioned tool now being used, it is a snap to change or clean those spikes